Search found 19 matches

by suberimakuri
Sun Feb 05, 2017 5:02 pm
Forum: General
Topic: IMPORTANT: Activity slow down
Replies: 15
Views: 118329

Re: IMPORTANT: Activity slow down

Sorry to hear Jean, please disregard my email and pm's. All the best :)
by suberimakuri
Sun Feb 05, 2017 4:57 pm
Forum: I/O Extender
Topic: 4x EGT, LC-1, Accelerometer? Dash?
Replies: 0
Views: 1141

4x EGT, LC-1, Accelerometer? Dash?

Hi there, Been trawling the forums and struggling to put it all together. Have an MS3X, long time user (2003?) Requirements: 1) 4x EGT K probes. Red closed stingers from DIY. 2) I have an LC-1, could interface the serial connection, currently using 0-5V input into MS3X EGO. 3) Accelerometer?... not ...
by suberimakuri
Thu Jan 12, 2017 4:48 am
Forum: New Boards
Topic: CAN-EGT+
Replies: 67
Views: 56248

Re: CAN-EGT+

Hi Jean, can you please PM price for 4 and 8 channel EGT? Thank you.
by suberimakuri
Wed Jan 14, 2015 3:11 am
Forum: Dual VR
Topic: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1
Replies: 5
Views: 3411

Re: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1

So we have success. Thank you Jean! :) I got to plug the laptop in as per suggestion above before car went back and rpm was there. VR1 to Opto +ve in with 5v pullup 1k resistor, opto -ve grounded, vr2 to vr2+ve. Both inputs on rising edge, changing an or both edges to falling loses rpm on cranking. ...
by suberimakuri
Tue Jan 13, 2015 1:04 am
Forum: Dual VR
Topic: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1
Replies: 5
Views: 3411

Re: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1

Unfortunately not to be. Car has been sent back to owner before I could try suggestions. Sorry.
by suberimakuri
Fri Jan 09, 2015 10:03 pm
Forum: Dual VR
Topic: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1
Replies: 5
Views: 3411

Re: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1

My mate has just tried suggestion using pull up on optoin and ground opto neg but injectors are not pulsing (led test) so probably not sync. Need to plug my laptop in and see. I'm going to try resistor for vr2+ pickup tomorrow with my laptop. Will also double check and try rising falling combination...
by suberimakuri
Fri Jan 09, 2015 9:07 pm
Forum: Dual VR
Topic: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1
Replies: 5
Views: 3411

Re: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1

Thank you for rapid reply.
Didn't ground Opto negative so will try that.
Squirt hardware docs has vr2- on pin 21.
Will try vr2 pull up if no luck.
by suberimakuri
Fri Jan 09, 2015 7:54 pm
Forum: Dual VR
Topic: Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1
Replies: 5
Views: 3411

Dual VR2.1 and Microsquirt 2.2 - 4AGE 24+1

So, have just tried a bunch of combinations trying to get RPM on this setup. Saw the other thread. 4AGE dual vr distributor, 24 tooth NE, 1 tooth G sensor. Tried: 1) VR1+- and VR2+- on Microsquirt inputs. Shared G- ground. Tooth logger shows teeth, which I think is NE wheel. Nothing on VR2, nothing ...
by suberimakuri
Sun Aug 31, 2014 12:09 am
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

So. The timing gun was put on the 12v coil feed to get a pulse. If the timing gun clamp is closed around #1 12v, timing advances with rpm. If the timing gun clamp is open around #1 12v (with thumb), timing doesn't advance with rpm. Matching MS. If timing gun clamp is closed around #2 12v, timing doe...
by suberimakuri
Sat Aug 30, 2014 10:45 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Have ground both pin 14's. Now it gets interesting. Wasted spark with 1+4 on spark A and 2+3 on spark B. 2+3 cylinders timing is stable. 1+4 cylinders timing advances. Double checking ecu point for spark output but doesn't make any sense to me... Also it runs very poorly and seems to lose sync with ...
by suberimakuri
Sat Aug 30, 2014 8:25 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Good thinking. Thank you. Will try and report back.
by suberimakuri
Sat Aug 30, 2014 8:19 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Wow, awesome response.
Okay, as I'm using dual VR, reversing input wiring is difficult.
I'll swap edges and ground pin 14 on both LM's.
Do you suggest the 0.01uF cap on G2+ to ground?
by suberimakuri
Sat Aug 30, 2014 8:12 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Hi Jean, Car is up and running. RPM seems stable, but when set timing fixed at 10 deg, it advances with rpm. A good 15-20 degress. Have tried both rising and both falling edges. Haven't tried combination of the two. Have not grounded pin 14 of LM's or put 0.01uF cap across G+ to ground as Ken from M...
by suberimakuri
Thu Aug 28, 2014 6:31 am
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

The photos posted for output from LED's ended up being incorrect. Latest photo attached.
tested and COP's were firing correctly in wasted spark.
by suberimakuri
Mon Jun 02, 2014 3:16 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Thanks will see how goes.
by suberimakuri
Sun Jun 01, 2014 1:14 am
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

RESOLVED Max RPM on drill was only 250rpm and TunerStudio tooth logger showing one big, one small... which got us thinking something wrong. Turns out the colour wired to LM1815 for NE was not matched to the NE pickup in dizzy. Quick resolder and RPM at cranking now 200rpm off the starter motor. Succ...
by suberimakuri
Sat Apr 19, 2014 9:17 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Sweet! Thanks.
by suberimakuri
Sat Apr 19, 2014 9:11 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

Re: VR1.1 + MS2 on v2.2

Thanks Jean, what do you mean by dedicated connector on?
The common sensor ground comes in to case on dedicated pin then jumped(black wire) to VR board ground pad.
VR board earth's via other ground pad via brown wire to v2.2 diode.
by suberimakuri
Sat Apr 19, 2014 4:53 pm
Forum: Dual VR
Topic: VR1.1 + MS2 on v2.2
Replies: 17
Views: 11820

VR1.1 + MS2 on v2.2

Hi Jean and everyone, I had built a MS1 on v2.2 board ages ago running msextra fuel only. Never got round to installing the VR1.1 board bought at the time. Am bringing it into the future with a MS2 chip (also on msextra) and wiring in the VR1.1 Going on a Toyota 4age so typical ND 24+2 distriutor, a...