Search found 134 matches

by superdavemotorsports
Tue Jul 02, 2019 12:44 am
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

I got it.. Just had to go back through a old thread http://forum.jbperf.com/viewtopic.php?f=9&t=1534&start=20 and compare some old msq's .. It was just a matter of getting the CAN settings right. It isnt always clear what adc numbering to use. sometimes adc0 is adc1 or adc01 .. The port is always pt...
by superdavemotorsports
Mon Jul 01, 2019 12:44 am
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

Jean, I reloaded firmware for iox and ms3x,ms3x I upgraded to 1.5.2 beta firmware and ini, once I get this figured out I'm installing my new DBW setup. I havent had a chance to look for the diyautotune can-egt firmware. I tried moving the inputs and outputs around to the 3 different ports. Initially...
by superdavemotorsports
Sun Jun 30, 2019 10:31 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

Here's a link to the iox extender firmware and ini from another thread were talking in.
http://forum.jbperf.com/viewtopic.php?f=9&t=1294
by superdavemotorsports
Sun Jun 30, 2019 10:23 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

The table number is not set in the ini. It just tell TunerStudio which table to read by telling it which command to use. And this is the table that contains all the log data so this is what TunerStudio will read and what the MS3 will also read when it wants to get data from the IOx or the CAN-EGT. ...
by superdavemotorsports
Sun Jun 30, 2019 6:40 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

Ive been working on converting and installing a itb manifold for more than a year. Some time ago I created a new tune and at that time everything was working. Then I believe when I was trying to start the motor the battery voltage dropped to low/EMI event corrupted something and I got a tunerstudio ...
by superdavemotorsports
Sun Jun 30, 2019 2:00 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

Is ochGetCommand where the table # is set?
Are there any other instances of the the table in the ini?
Is it the same ochGetCommand location in the main controller ini?
by superdavemotorsports
Sun Jun 30, 2019 1:55 pm
Forum: I/O Extender
Topic: Newest firmware
Replies: 2
Views: 41

Re: Newest firmware

Thanks Jean
by superdavemotorsports
Sun Jun 30, 2019 12:40 pm
Forum: I/O Extender
Topic: Newest firmware
Replies: 2
Views: 41

Newest firmware

Looking for the newest firmware...
I thought there was a iox extender 0.1.2a? Somewhere
by superdavemotorsports
Sat Jun 29, 2019 10:35 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Re: Tables and Offset Settings after cofiguration error

I found some purdy good ini info in a old post .. Wasnt in the iox section, had to dig into the tinyiox threads to find it. Edit.. Iox/tinyiox are all in the same section http://forum.jbperf.com/viewtopic.php?f=9&t=1102#p6496 Some user manual updates sure would be nice. Between this and the endless ...
by superdavemotorsports
Sat Jun 29, 2019 4:13 pm
Forum: General
Topic: Tables and Offset Settings after cofiguration error
Replies: 11
Views: 170

Tables and Offset Settings after cofiguration error

While trying to start the car I let the battery voltage get to low and I thing that caused my ms3x to display a configuration error dialog. I dont recall if it said what the problem was because it went away at ignition off and didnt come back. Now I am having problems with my gen_pwm_A. not followin...
by superdavemotorsports
Sun Sep 09, 2018 1:34 pm
Forum: I/O Extender
Topic: tinyIOx on MS3 and LC2
Replies: 14
Views: 5383

Re: tinyIOx on MS3 and LC2

Shawn,
"I have spent an inordinate amount of time on this"

12 years since you built your MS3, welcome back to the Automotive Performance Electronics World (APEW for short)...
We're all a glutton for punishment here.
by superdavemotorsports
Sat May 13, 2017 3:35 pm
Forum: General
Topic: Port scanner
Replies: 5
Views: 11949

Re: Port scanner

Could you add a link to the latest IOx firmware .. Are you supporting the DIYAutotune CAN-EGT box? Maybe a link to that firmware as well .. if you are supporting that. If not when I find that info I will add a link. Found your firmware .. Still looking for CAN-EGT http://jbperf.com/io_extender/firm...
by superdavemotorsports
Sat May 13, 2017 3:32 pm
Forum: General
Topic: Port scanner
Replies: 5
Views: 11949

Re: Port scanner

Could you add a link to the latest IOx firmware ..
Are you supporting the DIYAutotune CAN-EGT box? Maybe a link to that firmware as well .. if you are supporting that. If not when I find that info I will add a link.
by superdavemotorsports
Wed Apr 19, 2017 2:58 pm
Forum: New Boards
Topic: CAN-EGT+
Replies: 67
Views: 56243

Re: CAN-EGT+

Jean,
Have any can egt board available? I'm looking for 8 K type inputs.
Thanks Dave
by superdavemotorsports
Fri Nov 04, 2016 3:37 pm
Forum: I/O Extender
Topic: Generic PWM problem came back
Replies: 2
Views: 1895

Re: Generic PWM problem came back

Thank you ... I dont know where the ini in my project came from but it must have been old because this one fixed it.
by superdavemotorsports
Fri Nov 04, 2016 3:16 pm
Forum: I/O Extender
Topic: Generic PWM problem came back
Replies: 2
Views: 1895

Generic PWM problem came back

Jean,
Having problems with the Geneic PWM controls again after one of the last tunerstudio updates.
PWM A Bug.jpg
PWM A Bug.jpg (214.44 KiB) Viewed 1895 times
I tried this
gen_pwmA_2015-08-06_14.45.46.zip
(1.15 KiB) Downloaded 95 times
msqpart file you uploaded last time and it didnt fix it.
Is it just a simple fix in the IOx ini file?
by superdavemotorsports
Thu Sep 15, 2016 1:52 am
Forum: I/O Extender
Topic: PWM fuel pump control
Replies: 99
Views: 63055

Re: PWM fuel pump control

Thank you for your time Excellent I will proceed then with the update and return with the results. Did you see my edit on the last post regarding frequency limitations? I have not experience any frequency limitations (11000hz currently) with the IRFZ46N and the IRFP260N is the same configuration so ...
by superdavemotorsports
Thu Sep 15, 2016 1:26 am
Forum: I/O Extender
Topic: PWM fuel pump control
Replies: 99
Views: 63055

Re: PWM fuel pump control

Ive done some googling and found https://reibot.org/2011/09/06/a-beginners-guide-to-the-mosfet/ and there he discusses Drivers for MOSFETS with some suggestions for FET drivers. MIC4422YN – Max of 18v, 9Amps peak, 2 Amps continuous. MCP1407 – Max of 18v, 6Amps peak, 1.3 Amps continuous. UCC27424 – C...
by superdavemotorsports
Thu Sep 15, 2016 1:05 am
Forum: I/O Extender
Topic: PWM fuel pump control
Replies: 99
Views: 63055

Re: PWM fuel pump control

I am relatively new to electronics building after realizing all the fun stuff I can do with them. I can find data sheets and compare specifications but i am not proficient at identifying critical features or cross referencing compatible products. My current driver circuit uses YG902C2 low loss super...
by superdavemotorsports
Tue Sep 13, 2016 11:34 am
Forum: I/O Extender
Topic: PWM fuel pump control
Replies: 99
Views: 63055

Re: PWM fuel pump control

Jean, I am looking to upgrade the water pump PWM controller with larger components, better heat sinks and not obsolete components. I want to switch to a TO-247 package hexfet or something there abouts. Currently the tip122 in the IOx is driving a YG902C2 low loss super high speed rectifier and that ...