Search found 5 matches

by ChrisAudi80
Fri Aug 14, 2020 11:16 am
Forum: JimStim
Topic: New JimStim v2.0.4 user: Some questions
Replies: 6
Views: 1980

Re: New JimStim v2.0.4 user: Some questions

Just to update: I got it working 100% today. Just had to put the correct config in the Link ECU. Running it in 60-2 mode hall/hall. So now the injector test rig runs full sequential on all 8 cylinders. I must say the analog 0-5v output is very stable and precise. RPM is quite precise until about 600...
by ChrisAudi80
Sat Jul 18, 2020 11:19 pm
Forum: JimStim
Topic: New JimStim v2.0.4 user: Some questions
Replies: 6
Views: 1980

Re: New JimStim v2.0.4 user: Some questions

Hi Jean. That certainly clarifies things. Thank you. So, I connect 12v power supply for the JimStim to the blue terminals. Not just 9v? For this project I have an adjustable power supply for the Link ECU so will use this for the JimStim too. Regarding the square wave signal, it is how the board came...
by ChrisAudi80
Thu Jul 16, 2020 11:48 pm
Forum: JimStim
Topic: New JimStim v2.0.4 user: Some questions
Replies: 6
Views: 1980

Re: New JimStim v2.0.4 user: Some questions

Hi Jean,

Thank you for the reply. I think I understand what you said, so I have pre-wired it like the picture attached.

12v is red wire, 5v is blue, ground is black, first white wire is trigger signal 1, other white 2nd. Yellow is TPS.
White jumper is from 2nd trigger to SP1. Is it correct now?
by ChrisAudi80
Wed Jul 15, 2020 5:06 am
Forum: Introduce yourself
Topic: Hello from Bangkok
Replies: 1
Views: 1825

Hello from Bangkok

Hi Jean, Should have introduced myself before asking many questions. I'm Chris, living in Bangkok. I want to use the JimStim for triggering my Link Extreme ECU which I'm using to run an injector flow test bench. Hope to get it up and running quickly as this will expand and speed up my test capabilit...
by ChrisAudi80
Wed Jul 15, 2020 4:44 am
Forum: JimStim
Topic: New JimStim v2.0.4 user: Some questions
Replies: 6
Views: 1980

New JimStim v2.0.4 user: Some questions

Hello, I recently received a Jim Stim v1.5 with v2.0.4 FW. I want to connect it to my Link Extreme ECU. Using it on an injector flow test bench. I would like primary and if possible secondary trigger outputs so I can run sequential. Also, will use TPS signal output. Not confident on how to set some ...