Search found 12 matches

by Manu
Sun Jun 18, 2017 12:27 am
Forum: New Boards
Topic: Power panel
Replies: 14
Views: 15281

Re: Power panel

Hello Jean,

Do you have a spare PCB available ?

Thanks,
Manu
by Manu
Sat Feb 06, 2016 7:56 am
Forum: Peak&Hold Driver
Topic: doubt pick&Hold board and shipping
Replies: 11
Views: 8285

Re: doubt pick&Hold board and shipping

As long as you enable the additional injector channels, they will work even with untimed injection. Channels 1 and 3 will fire together and 2 and 4 together. Jean Good information here. Thank Jean. I'm now aware that if I want to run semi-sequential with this kind of setup I have to wire injector d...
by Manu
Tue Jan 05, 2016 9:30 am
Forum: JimStim
Topic: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engines
Replies: 19
Views: 20063

Re: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engin

Jean, Voici un fichier wheels_default.jsw qui modifie la roue phonique Renix 44-2-2-2 en lui ajoutant le capteur de phase pour les gens qui veulent faire les essais dans cette configuration. Attention, ce mode ne permet pas de valider les installations 66-2-2-2 avec capteur de phase, mais permet tou...
by Manu
Wed Dec 02, 2015 3:24 pm
Forum: Dual VR
Topic: Dual VR V2.1
Replies: 62
Views: 53129

Re: Dual VR V2.1

Thanks Jean
by Manu
Wed Dec 02, 2015 2:46 pm
Forum: Dual VR
Topic: Dual VR V2.1
Replies: 62
Views: 53129

Re: Dual VR V2.1

If you want to use the board with a Hall sensor (on either or both of the 2 inputs), you simply ignore the VR- connection (leave it unconnected from the dual VR board) and connect the Hall sensor signal to VR+. You will also need a pull up resistor on the signal if your sensor doesn't have one in i...
by Manu
Sat Nov 21, 2015 3:43 pm
Forum: JimStim
Topic: Emulate Negative Coil Trigger
Replies: 4
Views: 1191

Re: Emulate Negative Coil Trigger

Merci Jean :D
by Manu
Sat Nov 21, 2015 3:30 pm
Forum: JimStim
Topic: Emulate Negative Coil Trigger
Replies: 4
Views: 1191

Re: Emulate Negative Coil Trigger

Jean, En fait je me demande comment émuler le signal que l'on utilise lorsqu'on fait "injection uniquement" et que l'on se prends sur le moins de la bobine d'allumage. C'est le montage dans lequel on connecte le moins de la bobine d'allumage a l'entrée OPTOIN+ d'un microsquirt module et OPTONIN- au ...
by Manu
Fri Nov 20, 2015 9:04 am
Forum: JimStim
Topic: Emulate Negative Coil Trigger
Replies: 4
Views: 1191

Emulate Negative Coil Trigger

Hello Jean,

I would like to know if Jimstim can emulate the right signal for a negative coil setup ?

Thx,
Manu
by Manu
Thu Jul 30, 2015 2:34 pm
Forum: JimStim
Topic: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engines
Replies: 19
Views: 20063

Re: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engin

Hello Jean, Thank for your support. COM error goes after a PC reboot ;-) I was mainly sure about flah memory. I will play with all of that this night. I've done a mod for MS2extra that ad a new pattern (505 V6 60-2-2-2) to the firmware. This firmware work well with the engine. But I now need to test...
by Manu
Thu Jul 30, 2015 1:52 pm
Forum: JimStim
Topic: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engines
Replies: 19
Views: 20063

Re: Upgrading Wheel Pattern on JimStim V1.5 for LS 24x engin

Hello Jean, I've tried to use a custom pattern with my jimstim but I having some troubles : 1 - does the dos.exe replace the whole patterns in the jimstim or is it a temporary mod and when we unplug the power the jimstim return to base config ? 2 - I get a COM error when I try to use wheel_converter...
by Manu
Sat May 31, 2014 3:24 pm
Forum: I/O Extender
Topic: TinyIOx & Microsquirt Module
Replies: 3
Views: 1666

Re: TinyIOx & Microsquirt Module

Merci Jean, tu confirmes mes calculs ainsi que les notes du MicroSquirt Module de B&G ;-)

Dontz, you're welcome !
by Manu
Sat May 31, 2014 9:07 am
Forum: I/O Extender
Topic: TinyIOx & Microsquirt Module
Replies: 3
Views: 1666

TinyIOx & Microsquirt Module

Bonjour Jean, J'aimerais avoir ton point de vue à propos d'un projet que je suis en train de finaliser. Dans ce projet j'utilise un TinyIOX, un Microsquirt Module, un module BT BC417. Je me demandais si le régulateur 5V intégré au MicroSquirt Module était suffisant pour alimenter tout ce petit monde...