I see, that makes sense.
Thanks for your great support.
Michel.
Search found 4 matches
- Tue Nov 24, 2009 1:18 pm
- Forum: JimStim
- Topic: Tach signal very fast
- Replies: 4
- Views: 1973
- Tue Nov 24, 2009 9:44 am
- Forum: JimStim
- Topic: Tach signal very fast
- Replies: 4
- Views: 1973
Re: Tach signal very fast
Hi Jean, thanks for the tips. The problem was the ground pin of the Fine pot that had a cold solder joint. Didn't put enough heat, my bad. I have another question for you. With both pots CCW, I slowly turn the Fine pot and when the led starts flashing, it is fast for almost 1 sec, then goes back to ...
- Mon Nov 23, 2009 10:28 pm
- Forum: Introduce yourself
- Topic: Hi all
- Replies: 1
- Views: 1341
Hi all
I'm new here, but have already built a MSII for my turbocharged 325ix rally car.
I'm now building a second unit for a friend who will run a MSII in his BMW 2002 with a M10 engine.
I need help with the JimStim, so I posted a question in that forum.
Cheers.
I'm now building a second unit for a friend who will run a MSII in his BMW 2002 with a M10 engine.
I need help with the JimStim, so I posted a question in that forum.
Cheers.
- Mon Nov 23, 2009 10:19 pm
- Forum: JimStim
- Topic: Tach signal very fast
- Replies: 4
- Views: 1973
Tach signal very fast
Hello all, I think I need some help for the tach signal test. I finished assembling my V1.4 2.0.3 board. Led test is ok. Voltage is 3.25V. Regulator is just warm, cpu is cold. I installed the 2 jumpers as per the instructions. Pin 9 to 12v and pin 10 to cpu signal. When I test the tach signal, with ...