Hi from Dallas, new Audi guy (and build thread)

Post Reply
Asv4k8
Posts: 1
Joined: Mon Aug 13, 2018 5:37 pm

Hi from Dallas, new Audi guy (and build thread)

Post by Asv4k8 » Mon Aug 13, 2018 5:42 pm

Hi guys I am looking to get the IO board added to my MS2

I run direct coil control so I am out of inputs.outputs. Anyone offer this service, I prefer not to do it myself.

Here is my Turbo Audi build thread I run the MS2 on: https://forums.quattroworld.com/12vv6/msgs/2525.phtml

jbelanger
Posts: 3673
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Hi from Dallas, new Audi guy (and build thread)

Post by jbelanger » Mon Aug 13, 2018 6:01 pm

Hi and welcome to the forum.

I'm not sure if that was you but if so, as I said on my reply you can try contacting Peter Florance at pftuning.com or on the msextra forum. Others here may have other suggestions but you may also want to post on the msextra forum because you'll have a lot more people viewing your request than here.

Jean
Image

Post Reply