Hello from the UK

Post Reply
Rod S
Posts: 310
Joined: Mon Sep 06, 2010 4:03 am
Location: Rural Suffolk, England, UK

Hello from the UK

Post by Rod S » Mon Sep 06, 2010 4:27 am

Hi all,

I'm from across the pond in a very rural part of Suffolk in the UK.

I'm using an MS-2 wth Jean's siamese version of the sequential code on a turbocharged A-series engine (engine up and running but car not quite finished...) and have virtually run out of spare ports for everything I'm doing so will be going for the I/O extender in the near future as per Jean's suggestion on the TurboMinis forum.

Seems sensible to register here and keep all the question in the same place :D

Rod.

jbelanger
Posts: 3695
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Hello from the UK

Post by jbelanger » Mon Sep 06, 2010 8:59 am

Rod,

Welcome to the forum. Good to see you here.

Jean
Image

Stu_D
Posts: 18
Joined: Wed May 19, 2010 7:06 pm

Re: Hello from the UK

Post by Stu_D » Mon Sep 06, 2010 5:04 pm

Welcome Rod

I am also from the UK and grew up in Suffolk, now living near Cambridge. Where are you?

You will find this forum very useful, full of info and Jean is always very fast to answer questions.

Rod S
Posts: 310
Joined: Mon Sep 06, 2010 4:03 am
Location: Rural Suffolk, England, UK

Re: Hello from the UK

Post by Rod S » Wed Sep 08, 2010 3:25 am

Hi Stu,

A small village just outside Halesworth, only about 12miles inland so completely the opposite side of Suffolk to Cambridge...... :D

Post Reply