Signal breakout board for IO-Extender

If you have ideas for a new board, for new features for existing boards, or want to suggest new applications for the I/O Extender, this is the place to post.
Post Reply
Posts: 28
Joined: Wed Nov 25, 2009 11:16 pm
Location: Seattle, WA

Signal breakout board for IO-Extender

Post by Briang » Mon Jul 26, 2010 6:39 pm

I use the MS Signal Interceptor board a lot. Any interest in a similar device for the IO Extender? Or for the MS3X IO connector?

Posts: 3659
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada

Re: Signal breakout board for IO-Extender

Post by jbelanger » Mon Jul 26, 2010 7:38 pm

That's a good idea. I'll have to see if I can make a generic one so that the same board can be used on the IOx, MS3X, MS and the possible new uS module based ECU.

If I can come up with a useful design that will be useful for all platforms then it will make sense to get the new board made. The problem is that there isn't a lot of demand for the breakout board even though it's a very useful tool in a lot of different situations.


Post Reply