1.5 ohm injectors

Post Reply
Posts: 1
Joined: Sat Jun 29, 2013 4:06 pm

1.5 ohm injectors

Post by 02plus » Sat May 10, 2014 7:38 am

hallo ,

I want to use 1.5 ohm lpg injectors . Opening Time 2,5 ms . Must I make some chances to the board .If you use them as it is it only has 6 volt to open 4 A X1,5 ohm is 6 volt .
Did I miss something?

greeting Ad

Posts: 3655
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada

Re: 1.5 ohm injectors

Post by jbelanger » Sat May 10, 2014 11:41 am

It takes some time to reach the maximum current an injector can get with 12V. The board will detect that the 4A has been reached and will then reduce the voltage to the injector.

So you should not have to change anything to the board.


Post Reply