RPM Not synced for MS3 Goldbox connected to jimstim

http://jbperf.com/JimStim/index.html
Post Reply
abdussalammahmood
Posts: 1
Joined: Wed Aug 29, 2018 2:21 pm

RPM Not synced for MS3 Goldbox connected to jimstim

Post by abdussalammahmood » Mon Jul 22, 2019 1:19 am

HI,
I connected the jimstim 36-1 setting, 5v pullup , primery tach square wave given to crank input of ms3 goldbox ,spark A, B to Inj 1,2 and IGN A, B to IGN 1,2 but Tunner studio says rpm not synced and rpm does not move . All other inputs mat,tps,clt,o2 inputs are shown fine .When the jimstim is started FP turns on for a little and then turns off and ign blinkfaster and faster as rpm is turned . No inj outputs shown for now.
My question is why RPM is not being shown?

jbelanger
Posts: 3695
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: RPM Not synced for MS3 Goldbox connected to jimstim

Post by jbelanger » Mon Jul 22, 2019 10:35 am

I don't know much about the Gold box so you would be better off posting on the msextra forum. Also, when you post there post an msq and a datalog. It's probably also a good idea to post a composite log.

Jean
Image

Post Reply