Test question.

http://jbperf.com/JimStim/index.html

Test question.

Postby 107merc » Tue May 23, 2017 12:52 pm

Have wired and programmed JS11 in Tuner Studio for fan control, setting on and off temperature values.
Assigned output pin is 31, IAC2B. If I vary the CLT pot. above and below those temp values, as displayed on T/S, will I see a ground
signal on/off on pin 31 or is this asking something the J/S can't do.
Any info appreciated.
107merc
 
Posts: 22
Joined: Fri Mar 28, 2014 1:56 pm

Re: Test question.

Postby 107merc » Thu May 25, 2017 8:21 pm

Jean, thanks for responding on the MS forum. Much appreciated.
107merc
 
Posts: 22
Joined: Fri Mar 28, 2014 1:56 pm


Return to JimStim

Who is online

Users browsing this forum: No registered users and 1 guest

cron