Secondary trigger test

http://jbperf.com/JimStim/index.html
Post Reply
t120r
Posts: 9
Joined: Sat Nov 02, 2019 9:30 pm

Secondary trigger test

Post by t120r » Sat Nov 02, 2019 9:37 pm

Quick question about the secondary trigger test. Is the LED supposed to go dim and flash brighter or turn off and on per blink? My regular tach signal turns off and on, but my secondary remains dimly lit but flashes bright for the trigger event.

jbelanger
Posts: 3736
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Secondary trigger test

Post by jbelanger » Thu Nov 07, 2019 10:45 pm

You should see the same behaviour on the secondary trigger as what you see on the primary. But that may be different if the JimStim is connected to the MS depending on what input circuit you're using.

Jean
Image

Post Reply