External board example installation

http://jbperf.com/dual_VR/index.html

External board example installation

Postby jbelanger » Sat Nov 29, 2014 5:30 pm

Here are a few pictures of what one user has done to install an external dual VR board. It is installed in an empty relay box.

Image
Image
Image
Image
Image

One thing that I would do and have recommended is to cut the excess screw length and melt the nuts to the screws to keep them from coming undone (using a match or a lighter or a heat gun).

Jean
Image
jbelanger
 
Posts: 3617
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada

Return to Dual VR

Who is online

Users browsing this forum: No registered users and 1 guest