V2.1 Grounding

http://jbperf.com/dual_VR/index.html
Post Reply
jsiedlicki
Posts: 23
Joined: Mon Jun 27, 2016 8:16 pm

V2.1 Grounding

Post by jsiedlicki » Fri Nov 08, 2019 10:53 pm

I did not see it mentioned anywhere, but does the ground get connected to the MS sensor ground or the main power grounds?

jbelanger
Posts: 3736
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: V2.1 Grounding

Post by jbelanger » Fri Nov 08, 2019 11:06 pm

Connect it to the power ground (the proto area ground on the V3.0 board, for example). The sensor ground is for the analog sensors (ADC inputs).

Jean
Image

Post Reply