Release 0.1.2

http://jbperf.com/io_extender/index.html
http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx
jbelanger
Posts: 3724
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Release 0.1.2

Post by jbelanger » Sun Dec 22, 2013 8:02 pm

Thanks to James for pointing out that there was a typo in the original ini file that affected one of the GPS variables (course). It has now been corrected and the links in the first post point to these corrected files.

If you have already downloaded either the ini file or the zip file, you will need to download the file(s) again to get the correct one(s). And if you created a project with the original ini file you will need to update your project.

Jean
Image

masterx81
Posts: 94
Joined: Fri Nov 05, 2010 6:03 am

Re: Release 0.1.2

Post by masterx81 » Tue Dec 24, 2013 5:59 am

So the firmware is ok, i'll need only to change the ini in the tunerstudio project properties?

jbelanger
Posts: 3724
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Release 0.1.2

Post by jbelanger » Tue Dec 24, 2013 11:43 am

Yes.
Image

julian944
Posts: 11
Joined: Wed Aug 27, 2014 1:59 pm

Re: Release 0.1.2

Post by julian944 » Wed Oct 30, 2019 4:56 am

Hi Jean,

is 0.1.2 still the latest firmware (also for can egt)?
Thanks Julian

jbelanger
Posts: 3724
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Release 0.1.2

Post by jbelanger » Wed Oct 30, 2019 12:14 pm

Yes, this is the latest firmware for the IOx and my version of the CAN EGT. If you're talking about the DIYAutotune CAN EGT then they have a different firmware (that current version is 0.1.5).

Jean
Image

Post Reply