Jean,
This is magnificent! Everything was already there from in the beginning.
I will test it this weekend.
Many thanks!
Marc
TinyIOx
-
Marcdekika
- Posts: 14
- Joined: Tue Nov 01, 2016 12:13 pm
Re: TinyIOx
Jean,
As soon as I set the "Boost control location" to "remote", after a power cycle I get the following error:
Settings configuration error!
Tunerstudio is online.
Correct settings and powercycle controller.
Reported setting error:
Conflict with boost control pins.
You must correct this error, then power cycle your controller.
When I set it again to "local", then my controller is working again, but without boost control over the TinyIOx of course.
Hope you know what the problem is.
Marc
As soon as I set the "Boost control location" to "remote", after a power cycle I get the following error:
Settings configuration error!
Tunerstudio is online.
Correct settings and powercycle controller.
Reported setting error:
Conflict with boost control pins.
You must correct this error, then power cycle your controller.
When I set it again to "local", then my controller is working again, but without boost control over the TinyIOx of course.
Hope you know what the problem is.
Marc
Re: TinyIOx
Actually, I was able to reproduce this error here and that seems to be a bug in the MS2/Extra code. You will need to post this on the msextra forum so that this can be fixed.
Jean
Jean
Re: TinyIOx
I have confirmed that there was bug in the MS2/Extra code and I have a corrected version available for both 3.4.3 or 3.4.4. You can contact me if you want the s19 file for either. That was a very minor bug and I'll check with James so that he includes that in the next release.
Jean
Jean
-
Marcdekika
- Posts: 14
- Joined: Tue Nov 01, 2016 12:13 pm
Re: TinyIOx
Jean,
I am running 3.4.2 at the moment, but I will upgrade to the latest 3.4.4.
So please send me the .s19 file for 3.4.4.
Thanks
I am running 3.4.2 at the moment, but I will upgrade to the latest 3.4.4.
So please send me the .s19 file for 3.4.4.
Thanks
Re: TinyIOx
Email sent with the s19 file for 3.4.4. Use the ini file from the official release.
Jean
Jean
-
Marcdekika
- Posts: 14
- Joined: Tue Nov 01, 2016 12:13 pm
Re: TinyIOx
Hi Jean,
The servo is working magnificent.
I have ordered 3 more TinoIOx. I hope you have them in stock?
Marc
The servo is working magnificent.
I have ordered 3 more TinoIOx. I hope you have them in stock?
Marc
Re: TinyIOx
Marc,
Good to see that it is working well.
And yes, I have them in stock. The only problem is that shipping is slower at this time due to COVID and the holidays so I can't say when you can expect to receive the boards.
Jean
Good to see that it is working well.
And yes, I have them in stock. The only problem is that shipping is slower at this time due to COVID and the holidays so I can't say when you can expect to receive the boards.
Jean