T-IOx 0.2.0 firmware

http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx
Post Reply
Rod S
Posts: 310
Joined: Mon Sep 06, 2010 4:03 am
Location: Rural Suffolk, England, UK

T-IOx 0.2.0 firmware

Post by Rod S » Thu Apr 13, 2017 11:43 am


With the new "stand alone" mode mentioned here http://forum.jbperf.com/viewtopic.php?f=9&t=1558 (which I am well familiar with), but particularly this point,

"The other major change is the serial port. It is now possible to use the serial port to communicate between the PC and the TinyIOx for tuning and datalogging. That means that the TinyIOx can be used in a standalone configuration where it will not be connected to the CAN bus to an MS2 or MS3 but will be connected to sensors, LED displays, wideband controllers, and other devices."

Is it possible to have more than one T-IOx, not connected by CAN to an MS2/3 but connected by CAN to each other so that multiple T-IOX's can have a single serial link to a PC.


Posts: 200
Joined: Mon Feb 22, 2010 10:27 pm

Re: T-IOx 0.2.0 firmware

Post by dontz125 » Thu Apr 13, 2017 1:47 pm

Pending correction by Jean, I would suggest "probably," so long as each has a different CAN ID.

Post Reply