TinyIOx PWM out as a PWM input for another circuit

http://jbperf.com/io_extender/index.html
http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx

TinyIOx PWM out as a PWM input for another circuit

Postby jsiedlicki » Sat Mar 03, 2018 3:40 pm

I plan to use the generic PWM with Timer2 channel 1 output as the input for a digital to analog converter integrated circuit chip. The DAC PWM input can accept an input PWM signal between 30Hz and 100kHz and -0.3V - 6V. In this application is a driver circuit using a resistor and transistor between the TIOx and the DAC still needed or do I simply need a 5V pullup using a 1k resistor between the two?

John
jsiedlicki
 
Posts: 17
Joined: Mon Jun 27, 2016 8:16 pm

Re: TinyIOx PWM out as a PWM input for another circuit

Postby jbelanger » Sat Mar 03, 2018 3:52 pm

I assume that this chip will be in the same box as the TIOx and use the same power and ground. In that case, you can directly connect the PWM output to this new chip; there is no need for a pullup or another driver circuit.

Jean
Image
jbelanger
 
Posts: 3633
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada

Re: TinyIOx PWM out as a PWM input for another circuit

Postby jsiedlicki » Sat Mar 03, 2018 3:54 pm

Yes, same box, same power and ground.

Thanks for the fast reply!
jsiedlicki
 
Posts: 17
Joined: Mon Jun 27, 2016 8:16 pm


Return to I/O Extender

Who is online

Users browsing this forum: No registered users and 2 guests

cron