ECU Other than MS?

http://jbperf.com/io_extender/index.html
http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx
Post Reply
ry44an
Posts: 2
Joined: Mon Apr 30, 2018 9:13 pm

ECU Other than MS?

Post by ry44an » Mon Apr 30, 2018 9:21 pm

Hi All,
Im interested in using a TinyIOx in a project but utilising a different ECU other than Megasquirt.
I have complete control over the can receive and transmit templates in the other ECU, but i was wondering is it possible to access/setup etc the TinyIOx in another way than using an MS as a gateway??

Thanks

jbelanger
Posts: 3673
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: ECU Other than MS?

Post by jbelanger » Mon Apr 30, 2018 11:55 pm

Hi and welcome to the forum!

It is possible to use the serial port to configure everything on the TinyIOx and to log all the data. However, this requires TunerStudio and you also need the correct cable to connect to your PC. There is more information about this here: http://forum.jbperf.com/viewtopic.php?f ... 8536#p8536

Of course, if you want to use the serial port to communicate with an Innovate LC1 (or LC2 or MTX-L) then it won't be possible to use the serial port for configuration.

Jean
Image

ry44an
Posts: 2
Joined: Mon Apr 30, 2018 9:13 pm

Re: ECU Other than MS?

Post by ry44an » Tue May 01, 2018 12:35 am

Thanks for the reply Jean!
I am wanting to use the TinyIOx with a MoTeC ECU actually.

I want to use CAN to communicate between the ECU and TinyIOx, i was just wondering about the setup side of things.

Thanks again!

Post Reply