ECU Other than MS?

http://jbperf.com/io_extender/index.html
http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx

ECU Other than MS?

Postby ry44an » Mon Apr 30, 2018 9:21 pm

Hi All,
Im interested in using a TinyIOx in a project but utilising a different ECU other than Megasquirt.
I have complete control over the can receive and transmit templates in the other ECU, but i was wondering is it possible to access/setup etc the TinyIOx in another way than using an MS as a gateway??

Thanks
ry44an
 
Posts: 2
Joined: Mon Apr 30, 2018 9:13 pm

Re: ECU Other than MS?

Postby jbelanger » Mon Apr 30, 2018 11:55 pm

Hi and welcome to the forum!

It is possible to use the serial port to configure everything on the TinyIOx and to log all the data. However, this requires TunerStudio and you also need the correct cable to connect to your PC. There is more information about this here: viewtopic.php?f=9&t=1558&p=8536#p8536

Of course, if you want to use the serial port to communicate with an Innovate LC1 (or LC2 or MTX-L) then it won't be possible to use the serial port for configuration.

Jean
Image
jbelanger
 
Posts: 3578
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada

Re: ECU Other than MS?

Postby ry44an » Tue May 01, 2018 12:35 am

Thanks for the reply Jean!
I am wanting to use the TinyIOx with a MoTeC ECU actually.

I want to use CAN to communicate between the ECU and TinyIOx, i was just wondering about the setup side of things.

Thanks again!
ry44an
 
Posts: 2
Joined: Mon Apr 30, 2018 9:13 pm


Return to I/O Extender

Who is online

Users browsing this forum: No registered users and 3 guests

cron