Picture of my IO Extender

http://jbperf.com/io_extender/index.html
http://jbperf.com/io_extender/tinyIOx.html for the TinyIOx
Post Reply
msoultan
Posts: 92
Joined: Sun Mar 28, 2010 8:39 pm

Picture of my IO Extender

Post by msoultan » Tue Jun 08, 2010 1:55 am

I thought I'd post up a picture of my IO Extender:
iotop.jpg
iotop.jpg (52.06 KiB) Viewed 2586 times
As you can see, I also made a cut in the top cover so that I can access the thermocouple screws without removing the cover.

I also attached the word document for those of you that want those labels.
Attachments
CHT-egt labels.docx
(13.28 KiB) Downloaded 129 times

jbelanger
Posts: 3673
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Picture of my IO Extender

Post by jbelanger » Tue Jun 08, 2010 11:02 am

Nicely done. What did you use to make the cut?

Jean
Image

msoultan
Posts: 92
Joined: Sun Mar 28, 2010 8:39 pm

Re: Picture of my IO Extender

Post by msoultan » Tue Jun 08, 2010 11:38 am

We have a mill at work, so that made things much easier than trying to do it with my dremel :)

jbelanger
Posts: 3673
Joined: Sat Oct 03, 2009 12:24 pm
Location: Quebec, Canada
Contact:

Re: Picture of my IO Extender

Post by jbelanger » Tue Jun 08, 2010 11:43 am

That's what I thought. I wish I had access to a mill because using a dremel will never give such nice results (at least not with my skills :) ).

Jean
Image

Post Reply